Repipe Better.
  That's what we do.

Building Repipe

After 63 years
and over 1.8 million feet
of replacement pipe,
we know what it takes
to succeed

​If your building is over 15 years old, chances are you will need to replace your piping in the next few years. Patching leaks resolves immediate problems but is typically costly and disruptive. While any plumber can install copper pipe, only an experienced company has the knowledge and skill to replace pipe in a finished building occupied by residents. A poorly executed job can result in costly repairs due to unnecessary demolition work and a long list of angry residents.
​
We have been replacing risers for over 50 years. Since the early 2000's, our speciality has been the replacement of complete domestic water systems. This often involves the replacement of the water mains, recirculation lines, the risers throughout the building and the mechanical room piping. 

These jobs require access to suites and the opening of the wall sections where the pipe is located. Over our 50 years of experience, we have perfected techniques that allow us to make minimal openings, resulting in reduced impact on finishes. Our efficiency and our skilled technicians allow us to limit the down time of the water systems and the disruption to clients. 

Our Principles.

01
Experience
In order to better service our customers, we established a division dedicated to building re-pipe and riser replacement work. This specialized division ensures that the technicians have extensive experience with all aspects of re-pipe work and will remain on-site full time until the project is completed. 

02
Planning
Next to the budget, the biggest concern is the disruption to resident’s daily lives. Residents continue to live in their units during “construction work”; If not properly planned, superintendents and building managers can often spend more time managing tenant’s concerns, than actually managing the building.

At Brady & Seidner, we ensure that each step of the project is properly organized well in advance of construction. From a pre-construction tenant meeting to individual suite walk-throughs, every tenant understands each step of the project.

We focus on a specific area within the building so that the crew can be in and out the suite in a matter of days rather than weeks. During construction, key areas are covered with plastic and runners to minimize dust. Every evening, each unit is cleaned up and plastic removed to ensure that residents live as trouble-free as possible when they arrive home.

03
Execution
​We pride ourselves in minimizing costly repairs to the suite. We come up with creative solutions which reduce the size and location of all openings and thus lessen repair costs to architectural finishes (including tile, paint, murals, cabinets, etc…). Each opening is planned in advance and even the most demanding and fussy residents are amazed at the quality of our work and our attention to detail.
​
Our approach is not just to perform the repair but also to work with the owners, engineers and property managers in an attempt to prevent the problem from re-occurring. We redesign the system to operate more efficiently, thereby maximizing its life and reducing your operating costs. 

Zero Impact Process.
​

That's ZIP for short.
​We work with minimal openings and minimal impact to your building and residents. 
After we're done, our goal is to make it look like we were never there. 

Our People.
​ 

Foreman: D'Arcy Bingham

​D'Arcy has been with Brady and Seidner for over 17 years, since he started in 2001. Previously, D'Arcy worked for 5 years in the plumbing and mechanical field under a master plumber.. Over the years, he has developed great leadership and problem solving skills and he is an integral part of our team.

Foreman: ​Armenio Valente 

​
​​Armenio has been with Brady and Seidner for 12 years in the plumbing and repipe division. Since starting with Brady and Seidner, he has worked under a number of our most skilled and knowledgable plumbers to become an expert in the repipe field and an integral part of our team. 

FAQs

How do I proceed to find a contractor?

There are normally two ways to proceed:

1. Selecting a contractor such as Brady & Seidner who have a history and track record of installations similar to yours. Be sure to ask for a list of previous customers for your reference. 
2. Select a professional mechanical engineering firm with re-pipe experience. Have them create a full tender package for qualified re-pipe companies.

How long does it take to re-pipe a building?​

Depending on the number of floors and quantity of risers, it can take from as little as 4 weeks to as long as 5 months.

Do you have to work in my unit?​

In a total re-pipe of a building access to your suite is required. You will not have to be present, and security is usually provided by the property manager. All our mechanics have proper ID badges, and are signed in and out of the building. You are also notified in writing of our schedule well ahead of our arrival.

Which areas in my suite are affected by re-piping?​

In most instances bathrooms and kitchens are affected. Most times our work is performed under the vanities and countertops minimizing exposed wall openings.

Will I be without water in my suite?​

Water for each riser will be shut off for a short period of time while work is being performed; however we work on the kitchen or bathroom riser separately so water is always available in the suite.

Who cleans up

Our forces clean up on an ongoing basis, included vacuuming of carpets etc. All floors and walls are protected prior to our work commencing.